Appearance | White powder |
Loss on ignition | 32~35% |
Fineness,,≤76μm(200mesh) | ≥95% |
Moisture content | 0.8~3.5% |
Viscosity | ≥1.5Pa.s |
YH-938 can disperse at normal atmospheric temperature. It is better to be used as pre-gel.
It should be added before grinding your products (such as paints, pigments, coatings etc.).
To get the best dispersion effect, it is best to use high-shearing device.
YH-938 needs polar activator to fully disperse. The available polar activators are as follows:propylene carbonate, methanol/water (95/5). ethanol/water (95/5) or acetone.
The proper amount of polar activator can be adjusted according to different systems. Generally, the amount of polaractivator is 10~20% of organic bentonite.
The amount of YH-938 is usually 0.2~3.0% of the system (by weight).
. paint
. ink
. sealant
. oil drilling.
. lubricating grease
Support: Anxin Info Tech / 0572-5220701
ZHEJIANG YUHONG NEW MATERIALS CO.,LTD All Rights Reserved